We needed an atypical separator for a narrow space in a production line. Another company told us it wouldn't work. MAGSY designed, manufactured and delivered it. It works perfectly.
When we were building a new glass recycling line, we needed a solution for separating metal parts. We approached several companies, but MAGSY convinced us with its approach. They sent us a technician who personally mapped everything out and designed a solution specifically for our operation. Today, the separator runs flawlessly and has saved us huge costs for servicing the machines. What's more, I appreciate that they didn't give up on us even after delivery - regular servicing works great.
We needed a separator with an atypical inlet due to the specific material flow. Magsy proposed a tailor-made solution for us, which was very well-processed from a technical point of view. Delivery took place exactly as agreed, in about 8 weeks. After installation, the device worked immediately without any reservations. The separation efficiency meets the requirements. In addition, I appreciate the clear documentation and the helpful approach throughout the entire cooperation. I recommend it.
The order for the separator went smoothly and without unnecessary delays. Communication with the sales representative was pleasant and professional. We needed to adapt the device to a specific type of material, which was not a problem. Delivery was supposed to be in 90 days, but it took less than two months, which pleasantly surprised us. The separator works flawlessly. We will definitely contact Magsy again next time.
Thanks to Magsy, we finally solved the problem with dirt in production. The magnetic mat holds like a glove and works exactly as it should. Delivery was fast, really satisfied.
Telescopic magnetic separators / telescopic metal separators (MSV)
This type of magnetic separator is intended above all for separation of metallic magnetic particles from bulk materials with good loose properties. So called manetic extending grates on which all metallic particles are trapped represent the basic part of the magnetic separator.
Structure of the telescopic magnetic separators
They are fitted with permanent magnets, specifically with either ferrite magnets or those based on rare earth metals NdFeB where several times higher magnetic induction (magnetic force) is achieved; the grates fitted with these magnets are capable of catching even not fully magnetic particles.
These grates are mostly installed as a pair in the box structure designed in accordance with dimensional requirements of the customer. The upper grate contains always one magnetized tube less in order the tubes could create fall down labyrinth at subsequent shifting. This way the separated material contact with magnetic pipes is provided. The separation done in this manner is highly efficient.
The grates (finger magnets) can be also installed separately e.g. in a hopper. In this case, we provide the grates with so called spreading roofs which are positioned always above the level on the magnetized tubes so that to direct material evenly on the magnetized tubes.
Telescopic magnetic separator / telescopic metal separator - UP (MSV UP)
On contrary to the type described above, this magnetic separator has several crucial benefits and innovative features.
Its magnets are firmly attached to the separator body so there is no risk of injury caused by magnetic core catching on cleaning, e.g. to a metal floor or another metal structure.
Due to that, a risk of magnetic core damaging is significantly lower.
Easy cleaning.
Better safety at work.
On cleaning, no material gets onto the magnetic cores.
No cleaning agents needed.
Damaged pipes can be replaced easily.
Magnetic separator MSV UP - cleaning
Replacement of covering SST pipes
Magnetic grate STEFF
The main reason for the manufacture of this new magnetic grate type consists in the increase of the health protection and observing working safety rules. Magnetic cores are parts of the covering stainless-steel pipes and the entire grate forms a single unit during protrusion.
Another reason consists in the minimizing of the grate damaging risk. In case the STEFF grate and cleaning preparation are used, no magnetic core contamination can take place.
Grate cleaning
Either using the traditional technique when the magnetic cores are pulled from the stainless-steel pipes and metal particles are falling out automatically, or utilizing specially designed cleaning preparation. Cleaning is most comfortable, very fast and prevents the magnetic core damaging.
Animation of the cleaning process
Cleaning preparation
Together with telescopic magnetic separators, we can supply you also a special cleaning preparation made-to-measure of magnetic separators. The cleaning preparation serves especially simpler magnetic grate handling and magnetic core protection against pollution.
Grate (finger magnet) cleaning instructions
Emergency magnetic separator of dry mixtures (PMS)
If, from time to time, you need to pour a smaller quantity of a bulk material manually, this stand fits to your needs. Together with the magnet to be used in a hopper, it will form a simple and cheap dry mixture separator.
Operational steps
First of all, insert e.g. plastics bag into the stand head, or place a box under the stand
Magnet to be used in a hopper place into the stand head
Pour the material manually through the magnets
Metal particles are caught on the magnets
Only clean material (without metal particles) will fall into the bag or box
Main stand benefits
Tilting head
Stand is installed on wheels
Height-adjustable
Pipe systems
In order to facilitate the installation of our separators into piping as much as possible, we offer the delivering of standard transition elements of the types "square-circle" and "circle-square".
Flow magnetic separator for tanks (MF CIS)
This tank-type flow magnetic separator serves to the separation of metal impurities from dry powder materials of food, chemical or raw-material processing industries; during unloading, the material is transported from the tank using pressurized air.
The separator consists of two fully removable parts: magnetic component and separator body. Remove the component with magnetic pipes from the magnetic separator body and, using handrail, pull the magnets to the upper position. This way stainless steel pipes become demagnetized so metal parts fall off.
Magnetic separators are ended by parallel threads with a possibility of equipping them with transitional components adapting them to other dimensions. Magnetic separator can be connected to the pipeline DN 80. However, we are able to adapt the separator to various input and output dimensions, as well as types of ending.
The device is made of a stainless steel 1.4301 and its surface is treated by sanding. By request also separators in polished versions can be manufactured.
Separator benefits
Very easy manipulation and cleaning.
It meets food industry standards.
It is manufactured of the stainless steel 1.4301.
Materials that the separator is capable of sorting
Materials transported from tanks using pressurized air.
Tank separator design
Magnets are inserted into the stainless steel casing so they are protected against damaging and their cleaning is very easy, fast and comfortable.
The total device weight is 14 kg. Device handling may be managed by a single person. The separator is completed with silicone sealing (meeting food industry standards). Pipes in which magnets are located are welded to a removable component. Separator consists of 4 pieces of magnetic pipes with the diameter of 30 mm. The component with magnetic pipes is connected to the separator body using a bayonet closure, including a sealing, and is secured by wing nuts.
Magnetic separator is equipped with very strong rare-earth NdFeB magnets with the magnetic induction 10.400 G, capable of catching even very small magnetic particles. By request we can also use magnets with the magnetic induction higher than 14.000 G and with the temperature resistance of 180 °C.
Magnetic separator cleaning
Removing of caught metal impurities is very easy. First of all release wing nuts and bayonet closure. Then pull the component out of the separator body. Then release the fuse and pull the magnets out of the magnetic pipes. As soon as the pipes are clean, magnets can be inserted back to the component.
Magnetic separator with telescopic grates MSV – Classic
Magnetic separator with telescopic grates MSV – EKO
Magnetic separator with telescopic grates
Telescopic magnetic separators / telescopic metal separators (MSV)
This type of magnetic separator is intended above all for separation of metallic magnetic particles from bulk materials with good loose properties. So called manetic extending grates on which all metallic particles are trapped represent the basic part of the magnetic separator.
Structure of the telescopic magnetic separators
They are fitted with permanent magnets, specifically with either ferrite magnets or those based on rare earth metals NdFeB where several times higher magnetic induction (magnetic force) is achieved; the grates fitted with these magnets are capable of catching even not fully magnetic particles.
These grates are mostly installed as a pair in the box structure designed in accordance with dimensional requirements of the customer. The upper grate contains always one magnetized tube less in order the tubes could create fall down labyrinth at subsequent shifting. This way the separated material contact with magnetic pipes is provided. The separation done in this manner is highly efficient.
The grates (finger magnets) can be also installed separately e.g. in a hopper. In this case, we provide the grates with so called spreading roofs which are positioned always above the level on the magnetized tubes so that to direct material evenly on the magnetized tubes.
Telescopic magnetic separator / telescopic metal separator - UP (MSV UP)
On contrary to the type described above, this magnetic separator has several crucial benefits and innovative features.
Its magnets are firmly attached to the separator body so there is no risk of injury caused by magnetic core catching on cleaning, e.g. to a metal floor or another metal structure.
Due to that, a risk of magnetic core damaging is significantly lower.
Easy cleaning.
Better safety at work.
On cleaning, no material gets onto the magnetic cores.
No cleaning agents needed.
Damaged pipes can be replaced easily.
Magnetic separator MSV UP - cleaning
Replacement of covering SST pipes
Magnetic grate STEFF
The main reason for the manufacture of this new magnetic grate type consists in the increase of the health protection and observing working safety rules. Magnetic cores are parts of the covering stainless-steel pipes and the entire grate forms a single unit during protrusion.
Another reason consists in the minimizing of the grate damaging risk. In case the STEFF grate and cleaning preparation are used, no magnetic core contamination can take place.
Grate cleaning
Either using the traditional technique when the magnetic cores are pulled from the stainless-steel pipes and metal particles are falling out automatically, or utilizing specially designed cleaning preparation. Cleaning is most comfortable, very fast and prevents the magnetic core damaging.
Animation of the cleaning process
Cleaning preparation
Together with telescopic magnetic separators, we can supply you also a special cleaning preparation made-to-measure of magnetic separators. The cleaning preparation serves especially simpler magnetic grate handling and magnetic core protection against pollution.
Grate (finger magnet) cleaning instructions
Emergency magnetic separator of dry mixtures (PMS)
If, from time to time, you need to pour a smaller quantity of a bulk material manually, this stand fits to your needs. Together with the magnet to be used in a hopper, it will form a simple and cheap dry mixture separator.
Operational steps
First of all, insert e.g. plastics bag into the stand head, or place a box under the stand
Magnet to be used in a hopper place into the stand head
Pour the material manually through the magnets
Metal particles are caught on the magnets
Only clean material (without metal particles) will fall into the bag or box
Main stand benefits
Tilting head
Stand is installed on wheels
Height-adjustable
Pipe systems
In order to facilitate the installation of our separators into piping as much as possible, we offer the delivering of standard transition elements of the types "square-circle" and "circle-square".
Flow magnetic separator for tanks (MF CIS)
This tank-type flow magnetic separator serves to the separation of metal impurities from dry powder materials of food, chemical or raw-material processing industries; during unloading, the material is transported from the tank using pressurized air.
The separator consists of two fully removable parts: magnetic component and separator body. Remove the component with magnetic pipes from the magnetic separator body and, using handrail, pull the magnets to the upper position. This way stainless steel pipes become demagnetized so metal parts fall off.
Magnetic separators are ended by parallel threads with a possibility of equipping them with transitional components adapting them to other dimensions. Magnetic separator can be connected to the pipeline DN 80. However, we are able to adapt the separator to various input and output dimensions, as well as types of ending.
The device is made of a stainless steel 1.4301 and its surface is treated by sanding. By request also separators in polished versions can be manufactured.
Separator benefits
Very easy manipulation and cleaning.
It meets food industry standards.
It is manufactured of the stainless steel 1.4301.
Materials that the separator is capable of sorting
Materials transported from tanks using pressurized air.
Tank separator design
Magnets are inserted into the stainless steel casing so they are protected against damaging and their cleaning is very easy, fast and comfortable.
The total device weight is 14 kg. Device handling may be managed by a single person. The separator is completed with silicone sealing (meeting food industry standards). Pipes in which magnets are located are welded to a removable component. Separator consists of 4 pieces of magnetic pipes with the diameter of 30 mm. The component with magnetic pipes is connected to the separator body using a bayonet closure, including a sealing, and is secured by wing nuts.
Magnetic separator is equipped with very strong rare-earth NdFeB magnets with the magnetic induction 10.400 G, capable of catching even very small magnetic particles. By request we can also use magnets with the magnetic induction higher than 14.000 G and with the temperature resistance of 180 °C.
Magnetic separator cleaning
Removing of caught metal impurities is very easy. First of all release wing nuts and bayonet closure. Then pull the component out of the separator body. Then release the fuse and pull the magnets out of the magnetic pipes. As soon as the pipes are clean, magnets can be inserted back to the component.
Inquire about our services - you will receive an offer within 48 hours
Please describe your needs as precisely as possible. We will send you a confirmation of your request and redirect you to a suitable specialist. He or she can contact you for further details at the contacts listed.
This type of magnetic separator is intended above all for separation of metallic magnetic particles from bulk materials with good loose properties. So called manetic extending grates on which all metallic particles are trapped represent the basic part of the magnetic separator.
They are fitted with permanent magnets, specifically with either ferrite magnets or those based on rare earth metals NdFeB where several times higher magnetic induction (magnetic force) is achieved; the grates fitted with these magnets are capable of catching even not fully magnetic particles.
Flow magnetic separator for tanks (MF CIS)
